S3 New 'FIVE' Bar Ends
Terrific design from S3 with internal throttle support / bearing.
Great anodised aluminium finish.
These fit the majority of modern trials bars, and many older 7/8th bar.
Diameter of internal slug is 13.8mm with expanding "O" rings (on clutch side) to increase this size when tightened.
If you own a BETA please check handlebar ID. These can sometimes need the smaller 12mm Diameter S3 Bar ends specifically made for these Beta Bars.
if you own a TRS please check handlebar ID. Later model bikes (model dependant) can have thicker wall bars (usually the NEKEN bars) and will require the ZETA bar ends with expanding internal sleeves.
NOTE: THESE DO NOT FIT DOMINO BLACK TUBE (SLOW) THROTTLE TUBES THAT HAVE NO 'END' ON THE TUBE. PLEASE USE S3 'TOO' BAR ENDS IF YOU HAVE A DOMINO SLOW THROTTLE TUBE FITTED, OR IF YOU HAVE CUT THE END OFF THE STANDARD DOMINO THROTTLE TUBE.
Secure Payment Methods
Handlebar end plugs. S3 BAR ENDS 'FIVE'.
Fixation System patented by S3.
The throttle side plug TURNS with the grip, and work as a “bearing” for the throttle. Very simple and elegant solution. It protects the end of the bar, and also acts as a support bearing. Also the way it is fixed stops dirt getting under the grip and into the throttle tube, and stops the grip sliding along the bar. Good work S3.
Sure and precise.
5 colours, Red, Green, Black, Blue, Gold.